Nissan qashqai 1.5 k9k engine. Poor starting got two glow plugs gone. Everything else is fine. Plugs that came out are Beru 11 volt. Everywhere that i go they say new is 12 volt. Would this be an issue. I have put them in and code has cleared. As customer wanted car back. But im still not happy. thanks in advance.
SimplyDiag Network Partner:
Glow plugs
- Thread starter Rallyboy
- Start date
Hi Rallyboy,
These plugs would be PWM/ duty cycle controlled hence 11v range.
It all depends on what system is used as to whether they are correct or not for your vehicle.
As a tip for the next time you post -
1. Reg & VIN as per rules would enable us to look up what should be fitted?
2. The DTC put in the post tags would enable us to see if anyone else had posted about this.
The community rules are there to help us help you, not to make life difficult for you.
Cheers.
These plugs would be PWM/ duty cycle controlled hence 11v range.
It all depends on what system is used as to whether they are correct or not for your vehicle.
As a tip for the next time you post -
1. Reg & VIN as per rules would enable us to look up what should be fitted?
2. The DTC put in the post tags would enable us to see if anyone else had posted about this.
The community rules are there to help us help you, not to make life difficult for you.
Cheers.
Thanks for the reply Steve. Sorry for the poor post. Reg = PJ59EPF Vin = SJNFCAJ10U1515709. I had issue's before when someone else had fitted the wrong plugs They should have been 4.4 volt. I've done a bit of digging myself the and the ngk 5905 they suppiled are 9 ohms and the old one's are 9 0hms it's just the voltage difference im worried about. many thanks for your reply
wrong part number i have given they are 5909
SimplyDiag Network Partner:
