SimplyDiag Network Partner:
Avon Tuning

2013 Ford transit custom

Mercedes mad

Nathan Mercedes mad
Public Member
Monthly Member
Hi guys hope everyone is well I have a custom where the customer wants speed limiter off I have ford IDS but for life of me couldn’t see any sub menus for removal of limiter like the ford connects of that age I just after but help on how to go about this
 

SY Diagnostics

Ford Specialist
Staff member
Problem? Tag me please
If its not in BCM configuration then like Adam says it'll be an FDRS function. Forscan may be worth a look too but I've not had much success with speed limiters, Transits and Forscan
 

Mercedes mad

Nathan Mercedes mad
Public Member
Monthly Member
If its not in BCM configuration then like Adam says it'll be an FDRS function. Forscan may be worth a look too but I've not had much success with speed limiters, Transits and Forscan
Yeh to be honest tried to look at a that fdrs function and got no where lol thank you guys happy new yrs to u all
 

TDM 4x4

Well-known member
Public Member
Monthly Member
I’ve always used Autologic when doing this it’s very simple to follow. That’s on Defender, but it’s the Ford ECU and engine.
 

Adam Clack

Ford Specialist
Public Member
Monthly Member
It will be either IDS - Module programming > CC Configuration or FDRS, can’t remember which path it will be on

Some of the late 2006 - 2012 Transits couldn’t be done, it was built into the software rather than a configuration so bare that in mind, although I can’t be sure if this also affects Customs.

I’m pretty sure I’ve changed speed limiters on late customs using Forscan, but my memory’s shocking. Plus it don’t help we use three different tools plus Forscan!
 

Mercedes mad

Nathan Mercedes mad
Public Member
Monthly Member
Not in sub section like shown here
 

Attachments

  • 0132B3CD-5FFB-4088-A9A0-523FBE239BCA.png
    0132B3CD-5FFB-4088-A9A0-523FBE239BCA.png
    1.6 MB · Views: 15

Barry Lawson

Well-known member
Public Member
Annual Member
I was using FDRS yesterday on a 2017 Transit I was looking at Configuration options.

I noticed the Speed limit restrictions was listed in the IPC configuration.
 

SY Diagnostics

Ford Specialist
Staff member
Problem? Tag me please
Is fours

is for scan good system worth haveing ?
As a free (or £40 if you choose to pay licence) it's a nobrainer

Got me out the poo the other day on a 2014 fiesta clock change when Fdrs decided it was going to enter 32290 miles as 51000km. Even though the display showed miles. There was no going back. But with forscan I managed to fluke a fix
 
SimplyDiag Network Partner:
Automotive Technology
Top